TARC Double Lock Standing Seam
Suitable for low-pitched roofs down to 3 degrees, this is an ideal profile for harsh climates where snowfall, strong winds and heavy rains are a consideration. Allows straight or curved, radial or arched design flexibility. High upstand provides elegant depth and shading. It is uniquely designed to account for thermal movement.
Material Options
Support
Product Gallery
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
AVAILABLE IN
| Material | Aluminium coil-coated | Zinc | Copper |
| Thickness | 0.7mm or 0.8mm | 0.7mm | 0.6mm |
| Panel length | Please consult us at design stage >10m | Please consult us at design stage >10m | Please consult us at design stage >12 |
| Seam height | 25mm / 38mm | 25mm / 38mm | 25mm / 38mm |
| Panel width | 305-555mm Standard width 515mm |
305-600mm Standard width 505mm and 405mm. |
305-600mm Standard width 505mm and 405mm |
| Directions | Vertical | Vertical | Vertical |
| Minimum Pitch | 3.0 degrees* | 3.0 degrees* | 3.0 degrees* |
* Pitch < 7 degrees is subject to location and design, please contact us for further information.
SYSTEM BUILD UP
| Roof structure | Must consist of continuous trussers or top hats at max. 600mm spacing |
| Direct support |
Standard - Plywood 15mm structural to AS/NZS 2269 Non-flammable - MgO board min. 15mm |
| Underlay | Fully breathable and waterproofed underlay |
| Fixings | Fixed and sliding TARC approved Single Lock brackets at max. 400mm centres. Clips to be min. 0.4mm stainless steel |
FULLY DESIGNED BUILD UP SYSTEM
Fully supported roofing system including plywood, membrane, metal and fixings, complete with all flashings, trims and waterproofed details meeting adjoining building materials.
| Warranty |
Min. 10 years warranty covering material, min. 5 years on workmanship Extended warranties available on request |
| Materials | TARC Single Lock is available in materials and colours as above |
| Manufacture | All components of the TARC Single Lock system are manufactured by TARC in one of our manufacturing facilities. Trays over 8m length are typically roll-formed on site |
